Chilling Plant

Product Details:

Water Cooled Chilling Plant are quality engineered for year-round, 24 / 7 operation under demanding industrial applications.

Features:

• Microprocessor / PLC based control
• Energy efficient & reliable scroll compressor with hermetically sealed suction gas cooled motor
• High performance, low maintenance system with switching cycle control
• Crank case heater to prevent liquid migration of refrigerant in compressor
• Filter dryer to ensure moisture free system
• Sight glass with moisture indicator
• Large size stainless steel insulated tank to prevent heat loss
• Dry running protection of pump by water level sensor in the tank
• Water re-feeding valve to maintain level in the tank automatically
• Antifreeze thermostat for protection of evaporator and compressor
• High volume, high-pressure pump with stainless steel impeller
• Inbuilt process water bypass with valve
• All chilled water contact surfaces are non ferrous for protection against corrosion
• All wetted surfaces are stainless steel, copper or other non ferrous material
• Proven component suppliers like Danfoss, Copeland, Grundfos, Siemens have been chosen for ultimate reliability
• Tool free access panels and a neatly organized internal component layout provide easy access and service. Simply remove the panels to gain access to the entire cabinet of the chiller
• All chillers are factory tested under load prior to shipment
• Shell and Tube Condenser - high surface area with externally finned copper tube, design for Indian ambient condition
• Brazed Plate Evaporator / Shell and Tube Evaporator - provide higher heat transfer coefficients due to reduced fouling
• Evaporator Stainer - protects the evaporator from solid contaminants in the process water stream
• Condenser Water Strainer - helps to protect the condenser from solid contaminants in the condenser water

Product Details:

Leveraging on the skills of our professionals, we are involved in offering the best quality of Chilling Plant.

Features:

• Quality assured
• High strength
• Strong nature

Product Details:

Product Details:

• Compact design
• Precisely designed
• Longer functional life

Product Details:

Product Details:

Cooling Towers are basically regarded as heat rejection devices that extract waste heat from the atmosphere through the cooling of the water stream to a lower temperature.

Product Details:

Product Details:

Product Details:

• Energy saving
• Easy operation
• Maintenance free

Product Details:

• Longer service life
• Low power consumption
• Anti-corrosive housing
• Uses DX cooling technology
• Inbuilt anti-freezing protection system
• Energy efficient condensing unit
• AISI-304 S.S. Tanks with insulation
• Advance digital temperature control
• Engraved SS dip strip
• Wide range from – 500 ltrs to 5000 ltrs

Specification:

Product Details:

• Large application range
• Superior energy efficient working
• High cooling capacity
• Minimal dead space
• Large volume motor
• Quiet and low vibration working

Specification:

• Power: 100 W
  

Product Details:

Product Details:

In order to meet the huge market demands, we are involved in offering the best quality of Air Water Cooled Condensing Units Refrigeration.

• Compressor for three phase current
• Compressor for single phase 230 V/1/50Hz with fitted starting device and run capacitor
• Condenser with grooved copper tubes and Aluminium Fins,
• Generously sized liquid receiver
• High & Low-pressure cut-out including mounting brackets, wired to terminal strip, Electrical wiring to the connection box IP65
• Operating Pressure up to 28 bar
• High cooling capacity with reduced power consumption
• Full exploitation of the finned package due to the careful matching of the high capacity external rotors fans
• Fans with especially efficient low noise external rotor motors single phase
• Pre-charged with eater oil for R134a and R404/R507A
• Designed for extremely high ambient condition up to 65 0C /750 C

Product Details:

Glycol Chillers. The offered chiller is equipped with agitator, coil, control box, stainless steel frame, and OEM approved components.

Features:

• Freezing medium R22
• Compressor capacity up to 100%
• Noiseless chilling

Applications:

• Offices
• Housing society

Product Details:

• Screw chillers are available with HFC 134a, HFC 407C refrigerants
• Ease of refrigerant availability

• Flooded type chillers: Best in class full load and part load efficiency.
• DX type chillers: Good life cycle costs.
• High efficiencies obtained by use of enhanced surface copper tubes.
• Use of high-efficiency suction gas cooled motors.

• Cooling capacity ranges from 50 TR (175 kW) to 555 TR (1950 kW).
• Eco-friendly refrigerants HFC 134a, HFC 407C.
• Can be offered in SKD / CKD options for installations with very tight plant room approaches, such as for replacement.
• The chillers are used for various applications like human comfort, processing cooling, data center cooling, adiabatic cooling. Various options for electrical starters – Star-Delta, Soft Starters, VFDs.
• Heat exchanger tube options – Cu, SS, Cu-Ni, Titanium.

• Highly energy efficient & reliable compressor design.
• Simple yet highly reliable oil management.
• Well-designed oil recovery system in the flooded series eliminating any oil carryover issues.

• User-friendly K-Smart controller.
• Backlit LCD display, displaying the unit status in simple English.
• Easy BAS interface – Modbus, BACnet, LonWorks.
• Fault history with date and time stamp.
• Auto lead-lag for multiple chillers.